Our Placerville customer is constructing a new warehouse. We installed a industrial fire door to separate areas of our customer’s building in case of fire. This fire door was installed during the new construction of a warehouse.

This Door28 customer, a country club in Roseville California, had existing wooden entry doors. The wooden doors were 30 years old and worn and damaged through many years of daily use. The doors were in need of replacement.

Dorr 28 recommended new glass aluminum doors to be retrofitted onto the existing wooden frame (many new buildings have aluminum frames).

This customer had a scissor gate installed on the exterior of the building, with limited space, an inside normal application for a scissor gate was not feasible. With a hand full of break-in’s and attempts the gate was becoming harder and harder to open. They requested doors be installed rather than another gate. The install came out great.

This customer is being proactive to meet newer and local changes to regulations and requirements. They have tasked Door 28, Inc. with replacing the old square paddles used to activate a Low Energy Operator which opens the door.

We began by removing the old square paddles and installing a column paddle, the column paddles are not only compliant but also serve a purpose. These column paddles are designed to depressed anywhere from the top to the bottom of the paddle to activate the door.

We also installed a Wave technology paddle; these are way cool because it allows you to Wave your hand to open the door instead of touching it. An added safety measure to prevent the spread of viruses. We are seeing more and more touchless technology in the door industry.

Do you have Broken Glass, Door 28, Inc. can help. At this location, the customer had mutable pieces of glass in need of replacement. Some pieces glass had cracked simply due to the settling of the building and other pieces broken from landscaping accidently sending a rock in the direction of the building. Either way Door 28, Inc. can match your glass and have it replaced in no time.

This glass had a very rare finish, not to mention the glass is insulated 1” thick overall made up of two ¼” pieces of glass both being different colors altogether. Not only did we identify this customer glass perfect, but we order the correct sizes and installed all pieces within a week. This is not the first time the customer has had to replace glass and with the building continuing to settle and landscaper s still coming by once a week it wont be the last.

In these still uncertain times, we have had many customers reaching out for security and safety devices to help keep their employees and customers safe.

At these locations we removed existing storefront material, we then prepped and install bullet resistant transaction windows. These windows come with an extended shelf to comply with California ADA

A contractor reached out to us wanting to see if we could help with this project. The project included installing an Egress Only Door into an older fixed Hollow Metal window wall, the customer wanted to remove the center piece and install a door so the customer could have emergency egress operation to the exterior from a conference room in an emergency . The customer was specific, they wanted the door to blend in as if it was not a door looking from the exterior into the building.

With some careful measurements, we order a door to fit the opening. One challenge with this project was the grid in the glass , each piece of glass is individual and creating the sam e affect to match either side was proven to be difficult when ordering a door to match.

We cut the center section out, installed the new door . And because there was a threshold installed under the 3 sections originally, we were able to use it as the new egress door ’s threshold. W e installed a new V on Duprin exit device rim panic to meet egress , surface mount LCN c loser, and auto door bottom sweep seal. We fabricated Grid to glass stop to look like the grid width and height size by welding 1” metal . We then installed a glazing product to finish off the install, this door blends right in.

During the Pandemic and the unprecedented times with many riots happing around the country, this customer reached out to Door 28, Inc. inquiring what they could do to prevent or slow down protestors if they happen to come their way. This customer sells tactical equipment, guns, and ammo, the owner wanted to make sure it was not easy for anyone to get their hands on this type of merchandise. We began by taking measurements to accommodate the opening, at first, we thought we would be covering the entire storefront, we soon learned other than the doors, the remaining storefront is blocked on the interior.

The customer was only concerned with covering the doors, this install brought its own challenges. This building has a low overhang, meaning there was not enough head room from the top of the door to the lowest point of the overhang to fit the door. This proved to be no challenge for Door 28, Inc. with some slight modifications with the roll-up door head plates and cover/hood, the door was installed like a glove, tight and right. The operation of this door came out perfect. The customer expressed his satisfaction with some truly kind words following the install.

A reoccurring customer reached out to us inquiring on a security door that could cover their storefront’s automatic doors. They called and we came; we first began by understanding the customers need of their new door. This door was to be an inside between mount application, because of the jamb finish material it was important for this door to be the exact size, if the door came in too big or too small, we might be buying a new door.

With 120VAC power located at an instructed location by Door 28, Inc., the door was installed, tight but perfect! It was unknown the building construction material under the customer’s finished jambs, it was to the technicians surprise the jambs were constructed of concrete, which is the ideal application when installing a heavy-duty roll-up door. The technicians then installed the electric motor operator with a key switch down low for customers ease of operation.Following this install, following the install our customer mentioned, “Since having Door 28, Inc. as their door contractor they have no worry when it comes to their doors operations and or security. It’s nice to have doors that just work”